Pascals to mmHg Converter
Convert pascals to mmHg for scientific and medical pressure measurements.
Result
1 Pa = 0.007500637554 mmHg
Results are provided for general informational purposes only. Always verify important calculations independently. Learn more
About These Units
PA
The pascal is the SI unit of pressure, equal to one newton per square meter.
Common Uses: Scientific measurements, material testing, fluid dynamics
MMHG
Millimeters of mercury, traditionally used for blood pressure.
Common Uses: Medical blood pressure, barometers, vacuum measurements
Conversion Formula
PSI = bar × 14.5038
Worked Example:
To convert PA to MMHG:
2 bar × 14.5038 = 29.01 PSI
Common PA to MMHG Conversions
| PA | MMHG | PA | MMHG |
|---|---|---|---|
| 1 pa | 0.0075 mmhg | 50 pa | 0.375 mmhg |
| 2 pa | 0.015 mmhg | 75 pa | 0.5625 mmhg |
| 5 pa | 0.0375 mmhg | 100 pa | 0.7501 mmhg |
| 10 pa | 0.075 mmhg | 250 pa | 1.8752 mmhg |
| 25 pa | 0.1875 mmhg | 500 pa | 3.7503 mmhg |
Frequently Asked Questions
What pressure unit is used for car tires?
Car tire pressure is commonly measured in PSI (pounds per square inch) in the US, bar in Europe, and kPa in some countries like Australia and Canada. Typical passenger car tire pressure is 2.2-2.5 bar (32-36 PSI or 220-250 kPa). Always check your vehicle's specific recommendations on the door jamb sticker.
What is the difference between absolute and gauge pressure?
Absolute pressure measures total pressure including atmospheric pressure, while gauge pressure measures pressure relative to atmospheric pressure. A gauge pressure of 0 PSI means atmospheric pressure (14.7 PSI absolute). Most tire gauges and pressure equipment display gauge pressure, which is what matters for inflation and operation.
Why are there so many different pressure units?
Different pressure units evolved for specific applications and regional preferences. PSI is intuitive for imperial users, pascals are the SI standard for science, bar is convenient because it's close to atmospheric pressure, and atmospheres relate directly to sea-level conditions. Each unit serves particular industries and calculation needs.
How does altitude affect tire pressure?
As altitude increases, atmospheric pressure decreases, but the air inside your tires remains at the same absolute pressure. This means gauge pressure (what your gauge reads) appears higher at altitude. For every 1,000 feet of elevation gain, tire pressure increases by approximately 0.5 PSI due to decreased atmospheric pressure, not additional air.
What is normal atmospheric pressure?
Standard atmospheric pressure at sea level is defined as 101,325 pascals, equal to 1.01325 bar, 14.696 PSI, or exactly 1 atmosphere (atm). Weather systems cause pressure variations around this value. Low pressure (below 1000 hPa) often indicates stormy weather, while high pressure (above 1020 hPa) suggests clear conditions.
Related Articles
Pressure Units Explained: PSI, Bar, Pascal
Complete guide to pressure measurements from tire inflation to weather forecasting
Understanding PSI: Tire Pressure, Water Pressure & Beyond
Guide to PSI (pounds per square inch). Learn what PSI means, how to measure it, proper tire pressure, water pressure guidelines, and conversions to bar and kPa.
Measuring Noise Levels: Understanding Decibels
Comprehensive guide to decibel measurements and noise levels. Learn the logarithmic scale, common sound levels, hearing damage risks, OSHA limits, and dBA vs dBC weighting.
Tire Pressure Guide: PSI vs Bar for Safe Driving and Fuel Efficiency
Understanding optimal tire pressure, converting between PSI and bar, checking inflation correctly, and maintaining tires for safety and better fuel economy.