mmHg to PSI Converter
Convert mmHg to PSI for blood pressure and pressure measurements.
Result
1 mmHg = 0.01933671368 psi
Results are provided for general informational purposes only. Always verify important calculations independently. Learn more
About These Units
MMHG
Millimeters of mercury, traditionally used for blood pressure.
Common Uses: Medical blood pressure, barometers, vacuum measurements
PSI
Pounds per square inch is the imperial pressure unit.
Common Uses: US tire pressure, compressed air, plumbing, pressure washers
Conversion Formula
PSI = bar × 14.5038
Worked Example:
To convert MMHG to PSI:
2 bar × 14.5038 = 29.01 PSI
Common MMHG to PSI Conversions
| MMHG | PSI | MMHG | PSI |
|---|---|---|---|
| 1 mmhg | 0.0193 psi | 50 mmhg | 0.9668 psi |
| 2 mmhg | 0.0387 psi | 75 mmhg | 1.4503 psi |
| 5 mmhg | 0.0967 psi | 100 mmhg | 1.9337 psi |
| 10 mmhg | 0.1934 psi | 250 mmhg | 4.8342 psi |
| 25 mmhg | 0.4834 psi | 500 mmhg | 9.6684 psi |
Frequently Asked Questions
What pressure unit is used for car tires?
Car tire pressure is commonly measured in PSI (pounds per square inch) in the US, bar in Europe, and kPa in some countries like Australia and Canada. Typical passenger car tire pressure is 2.2-2.5 bar (32-36 PSI or 220-250 kPa). Always check your vehicle's specific recommendations on the door jamb sticker.
What is the difference between absolute and gauge pressure?
Absolute pressure measures total pressure including atmospheric pressure, while gauge pressure measures pressure relative to atmospheric pressure. A gauge pressure of 0 PSI means atmospheric pressure (14.7 PSI absolute). Most tire gauges and pressure equipment display gauge pressure, which is what matters for inflation and operation.
Why are there so many different pressure units?
Different pressure units evolved for specific applications and regional preferences. PSI is intuitive for imperial users, pascals are the SI standard for science, bar is convenient because it's close to atmospheric pressure, and atmospheres relate directly to sea-level conditions. Each unit serves particular industries and calculation needs.
How does altitude affect tire pressure?
As altitude increases, atmospheric pressure decreases, but the air inside your tires remains at the same absolute pressure. This means gauge pressure (what your gauge reads) appears higher at altitude. For every 1,000 feet of elevation gain, tire pressure increases by approximately 0.5 PSI due to decreased atmospheric pressure, not additional air.
What is normal atmospheric pressure?
Standard atmospheric pressure at sea level is defined as 101,325 pascals, equal to 1.01325 bar, 14.696 PSI, or exactly 1 atmosphere (atm). Weather systems cause pressure variations around this value. Low pressure (below 1000 hPa) often indicates stormy weather, while high pressure (above 1020 hPa) suggests clear conditions.
Related Articles
Pressure Units Explained: PSI, Bar, Pascal
Complete guide to pressure measurements from tire inflation to weather forecasting
Understanding PSI: Tire Pressure, Water Pressure & Beyond
Guide to PSI (pounds per square inch). Learn what PSI means, how to measure it, proper tire pressure, water pressure guidelines, and conversions to bar and kPa.
Measuring Noise Levels: Understanding Decibels
Comprehensive guide to decibel measurements and noise levels. Learn the logarithmic scale, common sound levels, hearing damage risks, OSHA limits, and dBA vs dBC weighting.
Tire Pressure Guide: PSI vs Bar for Safe Driving and Fuel Efficiency
Understanding optimal tire pressure, converting between PSI and bar, checking inflation correctly, and maintaining tires for safety and better fuel economy.